Product image of Multibic (Sodium Hydrogen Carbonate, Magnesium Chloride Hexahydrate, Sodium Chloride, Calcium Chloride Dihydra) supplied by GNH India

Multibic

Active Ingredient:
Sodium Hydrogen Carbonate, Magnesium Chloride Hexahydrate, Sodium Chloride, Calcium Chloride Dihydra
Origin:
EU

Multibic (Sodium Hydrogen Carbonate, Magnesium Chloride Hexahydrate, Sodium Chloride, Calcium Chloride Dihydra)

Sodium hydrogen carbonate, the active ingredient in Multibic, is an electrolyte replenisher presented as a sterile injectable solution for intravenous and haemodialysis use. It is combined with magnesium chloride hexahydrate, sodium chloride and calcium chloride dihydrate to provide balanced electrolytes during renal replacement therapy.
GNH India supplies Multibic as a licensed, GDP‑compliant international pharmaceutical supplier serving hospitals worldwide.

Manufacturer / TM Owner

Fresenius Medical Care Deutschland Gmbh

1
Pack/s
This product is added to your enquiry list

Request a Quote

Please fill out the form below and our team will get back to you shortly with pricing and further information.

A minimum order value applies. Our team will confirm the exact amount or quantity after reviewing your requirements.

Indications & Clinical Uses

Multibic is employed in renal replacement and critical‑care settings to manage electrolyte and acid‑base disturbances.

  • Metabolic acidosis: helps correct low blood pH during dialysis or acute care.
  • Electrolyte imbalance: restores sodium, chloride, calcium and magnesium levels in patients undergoing haemodialysis.
  • Calcium supplementation: provides calcium ions to support cardiac and neuromuscular function during dialysis sessions.

How It Works

  • Multibic delivers a balanced mixture of bicarbonate, chloride, calcium and magnesium ions directly into the bloodstream or dialysis circuit. The bicarbonate component buffers excess hydrogen ions, raising systemic pH, while the added electrolytes replace those removed during haemodialysis, supporting normal cellular function and cardiovascular stability.

Side Effects

Multibic may cause a range of adverse reactions, most of which are related to electrolyte shifts or infusion‑related events.

Common Side Effects

  • Hypernatremia: elevated blood sodium levels.
  • Hypercalcemia: increased calcium concentration.
  • Hypermagnesemia: excess magnesium in serum.
  • Metabolic alkalosis: over‑correction of acidosis.
  • Hypotension: drop in blood pressure during infusion.
  • Nausea or vomiting.

Serious or Rare Side Effects

  • Severe electrolyte disturbances leading to cardiac arrhythmia.
  • Volume overload causing pulmonary edema.
  • Anaphylactic or severe hypersensitivity reaction.
  • Acute respiratory distress syndrome (ARDS).
  • Central nervous system toxicity (e.g., seizures) due to extreme electrolyte imbalance.

Precautions & Warnings

When using Multibic, clinicians should observe several safety measures to minimize risk.

  • Assess baseline electrolyte and acid‑base status: obtain serum labs before infusion.
  • Monitor blood pressure and heart rhythm continuously during administration.
  • Adjust dialysis prescription: tailor bicarbonate and electrolyte concentrations to patient needs.
  • Avoid in patients with documented hypercalcemia or severe hypermagnesemia.
  • Use with caution in heart‑failure or fluid‑overload states.
  • Store at ambient temperature: keep in original container, protect from moisture and direct sunlight.

Avoid Interactions

Multibic can interact with other agents that affect electrolyte balance or acid‑base status.

Major Interactions (Avoid)

  • Concurrent intravenous calcium salts: risk of severe hypercalcemia.
  • Additional bicarbonate‑containing solutions: may cause profound metabolic alkalosis.
  • High‑dose loop diuretics: can precipitate rapid electrolyte shifts.

Moderate Interactions (Monitor Closely)

  • ACE inhibitors or ARBs: may enhance potassium retention.
  • NSAIDs: can affect renal handling of electrolytes.
  • Potassium‑sparing diuretics: monitor for combined electrolyte effects.

Frequently Asked Questions

Multibic is an intravenous and haemodialysis electrolyte solution that helps correct metabolic acidosis and replenish sodium, chloride, calcium and magnesium during renal replacement therapy. It is typically used in hospitals and dialysis centres to maintain acid‑base balance and electrolyte homeostasis in patients with kidney failure or acute critical illness.

Sodium hydrogen carbonate (bicarbonate) acts as a systemic buffer. When infused, it combines with excess hydrogen ions to form carbonic acid, which is then converted to carbon dioxide and water, raising blood pH toward normal levels. The accompanying electrolytes replace those lost during dialysis, supporting cellular and cardiac function.

The dose of Multibic is individualized. The prescribing clinician determines the volume and rate based on the patient’s laboratory values, dialysis prescription and clinical condition. No fixed regimen is provided; dosing is adjusted to achieve target electrolyte and pH goals.

Safety of Multibic in pregnancy or lactation has not been fully established. It should only be used if the potential benefit to the mother outweighs any possible risk to the fetus or infant, and under close medical supervision.

To order Multibic, submit an enquiry on the product page at gnhindia.com, specifying the required quantity. GNH India works with hospitals, pharmacies and procurement teams worldwide, verifies trade or institutional credentials, and then provides pricing, availability, shipping details (including cold‑chain if needed) and required import documentation.

Multibic offers a balanced combination of bicarbonate, sodium, chloride, calcium and magnesium in a single sterile formulation, which can simplify preparation compared with mixing separate electrolyte concentrates. Its composition is designed to match typical dialysis fluid requirements, but clinicians may choose alternative solutions based on specific electrolyte targets or institutional protocols.

Multibic should be stored at ambient temperature, below 25 °C, in its original sealed container. Protect the product from moisture, direct sunlight and extreme temperature fluctuations. Do not use if the vial appears cloudy, discolored or if the seal is compromised.

Multibic is administered either as an intravenous infusion or added to the dialysis circuit according to the prescribed volume and rate. Administration should be performed by qualified healthcare personnel using aseptic technique, with continuous monitoring of vital signs and laboratory parameters.

The most serious risks include severe electrolyte disturbances such as hypercalcemia, hypermagnesemia or hypernatremia, which can lead to cardiac arrhythmias, volume overload, and in rare cases, anaphylactic reactions. Prompt monitoring and adjustment of therapy are essential to mitigate these risks.

Multibic should be avoided in patients with known hypersensitivity to any of its components, untreated severe hypercalcemia, or uncontrolled metabolic alkalosis. Caution is advised for individuals with severe heart failure, fluid overload, or those receiving concurrent high‑dose calcium or bicarbonate preparations.

Published by

GNH India Pharmaceuticals Limited

Licensed pharmaceutical supplier

Last updated:

Disclaimer

At GNH India, we aim to provide information that is expert-reviewed, accurate, and reliable. However, all content on this platform is intended for general informational purposes only and does not constitute professional medical advice, diagnosis, or treatment. While efforts are made to maintain accuracy and currency, the information may contain errors, omissions, or may not reflect the latest developments. Always consult a qualified healthcare professional regarding any medical concerns.

All product names, brand names, trademarks and registered trademarks displayed on this website are the property of their respective owners. This website and its operator are not affiliated with, endorsed by, or authorized by any such trade mark owners unless expressly stated. Any reference to product names or trademarks is made solely for descriptive and informational purposes. No commercial relationship, sponsorship, approval, or association with any trademark owner should be inferred. Information provided herein does not constitute promotion, advertising, or an offer for sale of any medicinal product and is intended solely for general informational purposes.

All trademarks and brand names displayed on this website are used strictly in accordance with the provisions of the Trade Marks Act, 1999, specifically Sections 30 and 30(1) governing fair use. Trademark ownership has been accurately attributed under the "Manufacturer/ TM Owner" section in compliance with statutory requirements.

Ordering Process

Simple, Secure, and Seamless

Learn how our streamlined ordering process guarantees fast, compliant, and reliable access to essential medicines worldwide.

Quote request form

01

Submit Quote Request Form

Tell us what medications you need by filling out our simple form and uploading a valid document.

Price estimate review

02

We Review & Send Estimate

Our licensed pharmacists will verify your details and provide you with a detailed cost estimate.

Secure payment

03

Confirm & Make Payment

Discuss any queries, approve the estimate, and complete your payment.

Worldwide delivery

04

Get Delivered

Your medicines, safely packed and delivered to your door or nearest airport — hassle-free.

Quality You Can Trust

Our internationally recognized certifications underscore our commitment to safety, quality, and excellence.