Anticoagulant Citrate Phosphate Dextrose (Cpd) Solution And Adsol Preservation Solution (Adsol Red Cell Preservation Solution System In Plastic Container (Pl 146 Plastic))

Trade Name : ADSOL Red Cell Preservation Solution System in Plastic Container (PL 146 Plastic)

Fenwal, Inc.

KIT

Strength

Delivery Process

Submit a Request

You can fill in a request for your medicine through the form provided. You can access the form by clicking on the ‘Get Price’ button.

We’ll Get in Touch

Once we review your request, we’ll send you an estimated price for the medicine within 2-5 days.

Confirmation and Payment

You can fill in a request for your medicine through the form provided. You can access the form by clicking on the ‘Get Price’ button.

Submit a Request

You can fill in a request for your medicine through the form provided. You can access the form by clicking on the ‘Get Price’ button.

Product information is meant for

Wholesalers Suppliers Exporters Doctors MOH Tender Supplies Hospitals Brand CROs Comparator Supplies Generic Cooperate Sourcing Individual Patients Indian Institutional Buyers

Disclaimer

Trade Marks displayed in compliance with provisions of: Trademark Act, 1999 u/s 30 and 30 (1) of "Fair use"

GNH India is WHO GDP and ISO 9001 2015 Certified Pharmaceutical Wholesaler/ Supplier/ Exporters/ Importer from India of Anticoagulant Citrate Phosphate Dextrose (Cpd) Solution And Adsol Preservation Solution (Adsol Red Cell Preservation Solution System In Plastic Container (Pl 146 Plastic)) which is also known as ADSOL Red Cell Preservation Solution System in Plastic Container (PL 146 Plastic) and Manufactured by Fenwal, Inc.. It is available in strength of per ml. Read more

Anticoagulant Citrate Phosphate Dextrose (Cpd) Solution And Adsol Preservation Solution (Adsol Red Cell Preservation Solution System In Plastic Container (Pl 146 Plastic)) is supplied for Tenders/ Emergency imports/ Un - licensed, Specials, Orphan drug/ Name patient line/ RLD supplies/ Reference listed drugs/ Comparator Drug/ Bio-Similar/ Innovator samples For Clinical trials. Click to know price. Read less

Packaging and Delivery

Validated Cold Chain Shipment

We deliver your medicines through a validated cold chain shipment process. This process is used as these medicines need to manufactured, transported and stored at very specific temperatures, utilizing thermal and refrigerated packaging methods.

Inquire directly from our website and get 5% off on any medicine!

About GNH

No data

Rx only
Contains Y-Sampling Site for the collection of unanticoagulated whole blood samples for laboratory testing and the DONORCARE Needle Guard.
Integral filter unit intended for leukocyte reduction of AS-1 red blood cells:
The leukocyte reduced red blood cells may then be stored for the maximum allowable dating period.
Instructions for Use
Arrayn- Collection Procedure:
Use aseptic technique.
Note:
Note: n- Precautions:
u2022 Do not use unless the solutions are clear.
u2022 Before beginning procedure, obtain one access device for each BLOOD-PACK unit with Y-Sampling Site to be processed.
1. Identify BLOOD-PACK unit using appropriate donor identification system. 2. Adjust donor scale to desired collection weight and position primary container on the donor scale as far as possible below donor arm. 3. Clamp donor tubing between needle and primary container. This step may be performed prior to step 1 or 2. 4. Apply pressure to donoru2019s arm and disinfect site of venipuncture. 5. If blood pressure cuff is used, inflate to approximately 60 mmHg. 6. Remove needle cover per instructions below: a) Holding the hub and cover near the tamper-evident seal, twist cover 1/4 turn to break seal. b) Remove needle cover, being careful not to drag the cover across the needle point. 7. Perform venipuncture, appropriately secure donor needle and/or tubing and release clamp on donor tubing. 8. When good blood flow is established, slide the DONORCARE needle guard over the needle hub into the engaged position. Leave the front third of the needle hub exposed for access. Stabilize the front of the needle guard to arm with tape (see Figure 1). n In difficult collection conditions (e.g., slow blood flow), leave the needle guard disengaged behind the hub during collection. 9. 10. Collect the appropriate volume based on BLOOD-PACK unit used. n The volume of anticoagulant is sufficient for the blood collection indicated on BLOOD-PACK unit u00b1 10%. 11. Release the pressure on the donoru2019s arm as appropriate. n 12. To avoid possible contamination of the whole blood unit, before filling whole blood sample tubes, hermetically seal the donor tubing near the Y-Sampling Site on the side leading to the primary container using a metal clip or appropriate alternate method. n 13. To collect samples, insert the access device by pushing firmly into the Y-Sampling Site until the membrane seal is penetrated (see Figure 2). n n 14. Open the cap on the access device (if applicable). 15. Directly align the vacuum sample tube with the internal needle in the access device. Insert vacuum sample tube into device until the stopper is punctured. 16. Allow vacuum sample tube to fill with blood then remove from the access device. 17. Repeat steps 15 and 16 until the desired number of vacuum sample tubes have been filled. n n 18. Release remaining pressure on donor's arm. 19. If desired, apply hemostat to donor tubing between needle and Y-Sampling Site. 20. (see Figure 3) n a) Place folded sterile gauze over puncture site and hold in place with finger tip without exerting pressure. b) Hold sides of needle guard near the front, between the index finger and thumb. Pull the tubing smoothly until the needle is locked into the needle guard. c) Confirm the needle lock by: u2022 Listen for the 2nd u201cclicku201d as the needle is drawn into the needle guard. u2022 Ensure the tubing cannot be pulled through the needle guard. 21. Remove and discard the Y-Sampling Site and needle guard into an appropriate biohazardous waste container following established procedures. If donor tubing is also to be discarded, hermetically seal donor tubing directly above the primary container and remove. n Step 22 may be performed prior to step 21 if desired. 22. If the donor tubing is not hermetically sealed directly above the primary container, then strip the blood from the remaining donor tubing into the primary container. Mix and allow tubing to refill; repeat once. n u2022 If a platelet concentrate is to be prepared, it should be separated within 8 hours after blood collection. u2022 Fresh frozen plasma should be separated from the red blood cells and placed in the freezer at -18u00b0C or colder within 8 hours after blood collection. u2022 ADSOLu2122 red cell preservation solution should be added to the red blood cells immediately after the removal of plasma. Preparation of AS-1 red blood cells may vary depending on processing option selected: a) Within 8 hours of blood collection if whole blood is held at ambient temperature. b) Within 3 days of blood collection if whole blood is refrigerated. 23. At the appropriate time, prepare the BLOOD-PACK unit with Integral Filter for centrifugation. 24. Thoroughly mix the primary container end over end. 25. Load the BLOOD-PACK Unit into a centrifuge cup per the instructions on page 3 or 4. Page 3 describes Option A, the coil tubing method of cup loading. Page 4 describes Option B, the drop tubing method of cup loading. n n u2022 This guide is one method for centrifuge cup loading and applies to all Flex-Excel configurations. The specific stacking order and methods may vary depending on the workstation setup, centrifuge equipment, and Standard Operating Procedures. u2022 It is important to pack the filter properly in the centrifugation cup to avoid damage to the filter during centrifugation. u2022 Check valve must be placed in a horizontal position (Figure 4a, page 2). Avoid the clear (red tip) side from pointing downward (Figure 4b, page 2). See step 3 on page 3 or 4. u2022 Do not place the filter, breakaway cannula or check valve in the lower half of the centrifuge cup. See step 5 on page 3 or 4. 26. After loading the BLOOD-PACK Unit into the centrifuge cup, perform centrifugation according to center procedures. 27. Following centrifugation, remove containers from the centrifuge cup taking care not to disturb the red blood cell / plasma interface. 28. Place primary container in a plasma extractor and apply pressure. Open the cannula on the top of the primary container to transfer plasma into the empty TRANSFER-PACKu2122 container. 29. When the desired amount of plasma has been removed, clamp the tubing between the plasma container and the Y-connector closest to the plasma container and release pressure on the primary container. 30. Suspend the ADSOL red cell preservation solution container, open the cannula on the ADSOL solution container and drain the contents into the primary container of the CPD red blood cells. Clamp the ADSOL red cell preservation solution tubing. 31. Hermetically seal and separate the tubing between the Y-connectors or above the plasma TRANSFER-PACKu2122 container. Be careful to avoid fluid splatter. 32. Mix the ADSOL red cell preservation solution and red cells thoroughly. n If the ADSOL red cell preservation solution is not added to the red cells, ensure appropriate labeling of the red cell container. The pre-filter container does not include tubing with segment numbers. A CPD red cell without ADSOL red cell preservation solution may be stored between 1 and 6u00baC up to 21 days after collection. The attached SEPACELLu2122 FLEX-EXCELu2122 filter should not be used to leukoreduce a CPD red cell without ADSOL red cell preservation solution. n 33. . Invert the unfiltered AS-1 red blood cells and hang the filter set such that the filter remains vertical. To achieve maximum flow rate, allow the set to hang to full length. n 34. Inspect all tubing to ensure it hangs freely without kinks. If desired, a temporary clamp may be placed on the vent line, but must be removed prior to expelling air through the vent line. 35. Break the in-line cannula above the filter to start filtration. n n If filtration of red cells is initiated at ambient temperature, the filtration process can be completed at either ambient or refrigerated temperature prior to storing the red cells between 1 and 6u00b0C. However, for optimal filtration time, it is recommended to complete the filtration at ambient temperature. 36. As the filtered red cell storage container is filling, or when flow stops, clamp or pinch the tubing below the filter to occlude flow. n While the check valve is designed to prevent blood flow from entering the vent line below the valve, blood may flow down and fill the valve. 37. Squeeze the filtered red cell storage container to expel air from the filtered red cell container through the vent line. Continue squeezing the filtered red cell container until the vent line segments and check valve are filled with blood as desired. 38. Remove the clamp or release the tubing below the filter to resume red cell flow through the filter. If desired, the temporary clamp may be replaced on the vent line immediately after removing the clamp below the filter. When filtration is complete, air can be observed in the inlet side of the filter. n While the check valve is designed to prevent blood flow from entering the vent line below the valve, it is normal for air to pass through the valve and enter the vent line tubing. To avoid air from entering the vent line below the valve, the vent line may be clamped during this step, or blood may be expressed beyond the check valve during the air expel operation. 39. Hermetically seal and detach the tubing below the filter. Also, hermetically seal and detach the vent line between the one way valve and the top donor segment number. 40. Make segments from the vent line tubing and leave segments attached to the filtered red cell storage container. (QC samples may be prepared by thoroughly mixing the filtered red cells and stripping this tubing prior to sealing the segments.) 41. Store the AS-1 red blood cells, leukocytes reduced between 1 and 6u00b0C. 42. Infuse the red cells within 42 days of collection. n n
Arrayn- Arrayn- Array
Made in USA
1-800-933-6925
FENWAL, BLOOD-PACK, TRANSFER-PACK, ADSOL, and FLEX-EXCEL are trademarks of Fenwal, Inc.
SEPACELL is a trademark of Asahi Kasei Medical Co., Ltd.
DONORCARE is a trademark of ITL Corporation.
u00a9 2018 Fenwal, Inc. All rights reserved. 07-19-13-105u00a0u00a0u00a0u00a0REV: An n

u00a0Code 4R1584 n 10 Units n n Triple For the Collection and Processing of mL Blood Y-Sampling Site, DONORCAREu2122 Needle Guard, 16 ga. Ultra Thin Wall Needle n n Each unit consists of a PL 146 Plastic primary container with 70 mL of CPD solution containing 1.84 g Sodium Citrate (dihydrate) USP, 1.78 g Dextrose (monohydrate) USP, 209 mg Citric Acid (anhydrous) USP, 155 mg Monobasic Sodium Phosphate (monohydrate) USP, pH may have been adjusted with sodium hydroxide; one 400 mL PL 146 Plastic TRANSFER-PACK container with 110 mL of ADSOL Red Cell Preservation Solution containing 2.42 g Dextrose (monohydrate) USP, 990 mg Sodium Chloride USP, 825 mg Mannitol USP, 30 mg Adenine USP; one empty 400 mL PL 1240 Plastic TRANSFER-PACK container; one integral SEPACELL FLEX-EXCEL Red Cell Leukocyte Reduction Filter and one empty 450 mL PL 146 Plastic TRANSFER-PACK container for the storage of AS-1 red blood cells, leukocytes reduced. n n , non-pyrogenic fluid path See instructions for use. n n u2022Open pouch by tearing across at notch. u2022Direct handling of product surfaces prior to extended storage in the pouch, may result in mold growth. u2022Unused units in open pouch may be kept up to 60 days by folding and open end of pouch to prevent possible loss of moisture, provided: I) Units are not removed from pouch, or II) Unused units removed from pouch are returned to the pouch within 12 hours. Units may be removed from the pouch and returned only once. u2022Units removed from the pouch (that are not returned to the pouch within 12 hours) must be used within 4 days (96 hours). Units out of the pouch for longer than 96 hours must be discarded. FENWAL, BLOOD-PACK, ADSOL, TRANSFER-PACK and FLEX-EXCEL are trademarks of Fenwal, Inc. SEPACELL is a trademark of Asahi Kasei Medical Co., Ltd. DONORCARE is a trademark of ITL Corporation. n n n Lake Zurich, IL 60047 USA Made in USA 07-28-05-513 REV: A

Browse Our Services And Processes

Comparator Sourcing for Clinical Trials

GNH India brings over 10 years of experience in Comparator

Name Patient Supply

Today, the exact cause for many rare diseases remains unknown

Validated Cold Chain Shipment

With shifting of pharma industry from synthetic molecules to biologic

Clinical Trials Supply

STOP SOURCING..... START SMART SOURCING...... COME STRAIGHT TO THE SOURCE

Pharmaceutical Contract Manufacturing

GNH Provides Contract Manufacturing services for: Generic Medicines with following

Pricing

PRICING POLICY Terms of sales are typically prepaid, unless otherwise

Disclaimer

Please see the Legal Notice for detailed terms and disclaimers. The Legal Notice governs the use of this Website and by accessing and using this Website you agree to be bound by and accept the Legal Notice.

Browse from other international pharmaceuticals

General

64020 Products

GNH India Brings to over 64036 Product SKUs from India all at 1 place with easy access and global deliveries.

US NDC

71245 Products

GNH India Brings to over 71252 Product SKUs from India all at 1 place with easy access and global deliveries.

Canadian DIN

51046 Products

GNH India Brings to over 51047 Product SKUs from India all at 1 place with easy access and global deliveries.

Swiss Drugs

150 Products

GNH India Brings to over 150 Product SKUs from India all at 1 place with easy access and global deliveries.

NZ Drugs

13296 Products

GNH Brings to over 13298 Product SKUs from India all at 1 place with easy access and global deliveries.

FAQ

Check out our delivery process

Can’t find what
you’re looking for?

Get Price

Anticoagulant Citrate Phosphate Dextrose (Cpd) Solution And Adsol Preservation Solution (Adsol Red Cell Preservation Solution System In Plastic Container (Pl 146 Plastic))

Trade Name : ADSOL Red Cell Preservation Solution System in Plastic Container (PL 146 Plastic)

KIT

Delivery Process

Product information is meant for

Disclaimer

Trade Marks displayed in compliance with provisions of: Trademark Act, 1999 u/s 30 and 30 (1) of "Fair use"

Packaging and Delivery

About GNH

Similar Products

Desogestrel And Ethinyl Estradiol (Emoquette)

Diphenoxylate Hydrochloride And Atropine Sulfate (Diphenoxylate Hydrochloride And Atropine Sulfate)

Fluoxetine Hydrochloride (Fluoxetine)

Metoprolol Succinate (Metoprolol Succinate)

Losartan Potassium (Losartan Potassium)

Browse Our Services And Processes

Disclaimer

Browse from other international pharmaceuticals

General

US NDC

Canadian DIN

Swiss Drugs

NZ Drugs

FAQ

Can’t find what
you’re looking for?

COMPANY

SERVICES

QUICK LINKS

CONTACT US

Anticoagulant Citrate Phosphate Dextrose (Cpd) Solution And Adsol Preservation Solution (Adsol Red Cell Preservation Solution System In Plastic Container (Pl 146 Plastic))

Trade Name : ADSOL Red Cell Preservation Solution System in Plastic Container (PL 146 Plastic)

KIT

Delivery Process

Product information is meant for

Disclaimer

Trade Marks displayed in compliance with provisions of: Trademark Act, 1999 u/s 30 and 30 (1) of "Fair use"

Packaging and Delivery

About GNH

Similar Products

Desogestrel And Ethinyl Estradiol (Emoquette)

Diphenoxylate Hydrochloride And Atropine Sulfate (Diphenoxylate Hydrochloride And Atropine Sulfate)

Fluoxetine Hydrochloride (Fluoxetine)

Metoprolol Succinate (Metoprolol Succinate)

Losartan Potassium (Losartan Potassium)

Browse Our Services And Processes

Disclaimer

Browse from other international pharmaceuticals

General

US NDC

Canadian DIN

Swiss Drugs

NZ Drugs

FAQ

Can’t find what you’re looking for?

COMPANY

SERVICES

QUICK LINKS

CONTACT US

Can’t find what
you’re looking for?